Stabilizer and recycler

BOMAG RS 250 tractor-towed planer: Perfect interaction in the tractor class up to 300 hp.

Info

Simply mill, mix, stabilize.

Modern tractors have impressive engine power: they can now also be used for heavy earthmoving work. A tractor-towed planer can be driven directly via the rear PTO shaft. The advantages of this combination are plain to see: the investment is low, the system is very light and highly manoeuvrable, and a tractor can also perform other tasks on the construction site, resulting in high annual capacity utilisation.

Stabilization is often the most sensible and sometimes the only option, both economically and ecologically. The German Closed Substance Cycle and Waste Management Act stipulates that no soil that can be re-used on the construction site should be driven away. Stabilization eliminates the need to replace non-load-bearing soils. This process removes moisture from the material by mixing in binders (mix-in-place method), thus improving the compaction properties and load-bearing capacity. By mixing in cement, even unstable soils can be made load-bearing.

On smaller construction sites, in particular, using a tractor-towed planer makes more and more sense. The milling and stabilizer units are an ideal addition to the fleet for construction and service companies involved in earthmoving or soil replacement operations.

Full power with 1,000 revolutions.

The drive train is suitable for PTO shafts with the standard dimension (1 3/4 inch). The required input speed is 1,000 rpm.

Get more out of your tractor.

The BOMAG RS 250 tractor-towed stabilizer is designed for use with tractors from 200 hp to 300 hp and is ideally suited for pavement laying, embankment construction and backfilling.

Almost limitless power.

Coupling to the tractor is simple via the 3-point hitch (category 3 or 4). The milling depth can be adjusted easily and variably with the hydraulic lower link. Power is transmitted to the rotor via the PTO shaft, gearbox and a chain drive in an oil bath on both sides.

Water injection ensures homogeneous distribution.

The RS 250 tractor-towed stabilizer is optionally available with water injection directly into the mixing chamber. This always allows the exact amount of water required for the reaction of the cement to be injected. The system achieves an even distribution of water across the entire milling width (up to 500 l/min.).

2.5 m working width and 40 cm milling depth? No problem!

With its powerful chain drive, the BOMAG RS 250 can reach milling depths of up to 40 cm. The working width of the tractor-towed stabilizer is 2.5 m.

Cutting-edge technology for fast service.

As with BOMAG's large stabilizers, the RS 250 uses the unique BMS 15L exchange holder system. The cutting tools and toolholders can be replaced quickly and individually as required. The advantage: very short service times. The system stands out for its low wear and long service life.

Cutting tools in carbide quality.

Thanks to cutting tools with a 22 mm shaft diameter, the stabilizer is well equipped for a wide range of applications. It can be equipped with the cutting tool alternatives BRT 04 (e.g. for cohesive soils), BRT 02 (e.g. for gravel and sandy soils) and BRT 01 (also suitable for asphalt).

Extremely durable, thanks to wear-resistant steel.

The mixing chamber is particularly robust. The hood is made entirely of wear-resistant steel with 400 HB (Brinell hardness). The large, hydraulically adjustable tailgate makes it easy to adjust the crushing and mixing quality.

Weight 4,450 kg

Working width 2,520 mm

Request an offer Receive a non-binding offer

Documents

Datasheet Datasheet_RS250_PRE91020010_SA

Brochure Brochure_RS250_PRE107354_2110

View all

Find your nearest Dealer

Contact dealer Change Dealer

Please enter your location

Searching for Spare parts?

Hotline

Mo - Fr 08:00am to 17:00pm

+44 1622 795049

Spare parts enquiries

parts.gb⁤@⁤bomag.com

Parts Catalogue for Light Equipment

To the catalogue

Directly to the Machines

Product group

Refuse compactors

Recyclers & stabilizers

Pavers & feeders

Cold planers

Asphalt rollers

Single drum rollers & soil compactors

Light equipment

Fields of application

Stabilizing and recycling reinforces subsoils and allows the replacement of damaged bitumen road surface layers.

BOMAG tractor-towed stabilizer are particularly suitable for smaller construction projects, pavement and road building as well as for embankments and backfilling. The tractor can be used for a wide range of practical purposes, e.g. to pull the binder spreader, the water tank or the tractor-towed stabilizer. A tractor-towed stabilizer can be used to mix in binders or stabilize and improve non-load-bearing soils.

Specifications

Standards

Options

Show less

Further data on request / all data subject to change / illustrations may contain optional features

You can find more information regarding the CO2 emissions of all machines here.

Documents

Datasheet Datasheet_RS250_PRE91020010_SA

Brochure Brochure_RS250_PRE107354_2110

Maintenance

Maintenance: Good access: Quickly completed.

All maintenance points can be reached easily. Large service doors with simple locks open the way for good maintenance.

Extended warranties

Play it safe.

Peace of mind is priority number one: This not only applies to our machines. Protect yourself from unexpected costs even after expiry of the legal warranty. With our extended warranties, you receive all-round protection for up to 60 months.

Learn more

Assistance

Quality is the best protection for your investment.

When you see BOMAG on a machine, you can expect real quality. This applies both to our original parts and our service. Opting for a BOMAG means choosing top quality every time. Original parts and service are there to protect your investment. They ensure 100% machine power and availability – and ultimately the productivity and cost-effectiveness of your company. BOMAG offers a range of service products to keep you on the road.

Learn more