Stabilizer and recycler

BS 3: Attachable binder spreader for soil stabilization.

Info

With a hopper volume of 3 m³, making it the best choice for smaller projects.

BOMAG’s BS 3 tractor-mounted spreader is ideal for evenly spreading powdered binders like cement, lime and fly ash in base stabilization and subsoil improvement applications.

It can be used with tractors equipped with a standard three-point category 2 and 3 power lift (ISO 730-1).

The BS 3 binder spreader can be mounted at the front or rear. When mounted on the front of a tractor, it makes sense to combine it with a BOMAG tractor-towed stabilizer. In tandem with the powerful RS 250 or RS 300 models, it forms a compact team that can be controlled by just one operator, enabling spreading and stabilization with just one carrier vehicle.

Such a system can be used regardless of speed, and is light and manoeuvrable at the same time. The radar sensor measures the tractor's speed and automatically adjusts the spread rate (volume).

Using a mounted binder spreader is especially practical and effective on smaller construction sites or where space is limited.

Thanks to the standard three-point hitch, the binder spreader can be easily combined with almost any tractor on the construction site. It is powered by the on-board hydraulics of the carrier vehicle or tractor with two dual-acting valves.

See and be seen.

As an option, BOMAG mounted binder spreaders for tractors can be equipped with vehicle lights in accordance with the German Road Traffic Act (StVZO) and additional work lights for working at dusk or in the dark.

Reliable and powerful.

This tractor-mounted spreader features an adjustable 3-section spreading width: to 80 cm, 160 cm or 240 cm.

The automatic spread rate control allows it to distribute the preset volume of binding agent precisely, evenly and perfectly dosed across the surface.

Quality for a long service life.

The rotary valve and chamber plates are both made of stainless steel. The stainless steel chamber plates can also be replaced individually. Factors that increase the service life and facilitate maintenance and repair.

The rotary valve drive was integrated into the contour of the binder spreader. This protects it optimally against damage from the outside.

Always the best view.

The flat hopper design gives the operator an excellent line of sight to the front and the work surface.

And with the optionally available camera system, the operator always has everything in view.

Simple, self-explanatory operation.

The mounted soil stabilization spreader can be operated intuitively via the control panel in the driver's cab and the clearly marked soft-touch switches.

All machine parameters are visible on the 4.3-inch colour display. The operator immediately sees whether the hopper is almost empty and needs refilling as well as the current settings for spreading width and quantity throughput.

Neither is a problem: filling from above or from the silo vehicle.

The hopper flap can be fully opened for quick and clean tank filling from above, for example, with big bags.

Alternatively, the binder can also be blown in from the silo vehicle using compressed air. A dust filter is optionally available.

The current filling level is always shown on the display, whether almost empty or already full to the brim. An automatic horn signal lets the silo driver know when the hopper is full again.

Weight 1.290 kg

Working width 2.400 mm

Request an offer Receive a non-binding offer

Documents

Datasheet Datasheet_BS3_BS 5_PRE91094010_SA

Brochure Brochure_BS3_BS5_PRE107356_2301

View all

Find your nearest Dealer

Contact Dealer Change Dealer

Please enter your location

Searching for Spare parts?

Contact your distribution partner

Find your nearest dealer

Spare parts enquiries

parts⁤@⁤bomag.com

Parts Catalogue for Light Equipment

To the catalogue

Directly to the Machines

Product Group

Refuse compactors

Recyclers & stabilizers

Pavers & feeders

Cold planers

Asphalt rollers

Single drum rollers & soil compactors

Light equipment

Fields of application

BOMAG binder spreaders for tractors can be used in earthworks and road construction.

These mounted spreaders are ideal for smaller projects involving soil improvement (by adding lime) or soil consolidation (by adding cement). Here, they form an effective and economical team with a tractor-towed stabilizer or a trailing soil stabilizer.

Specifications

Standards

Speed-dependent dosing
Radar sensor for speed detection
Compressed air filling from front
Variable working width
Large hydraulic flap for big bag/excavator/silo filling
4.3“ display for machine control from the tractor cab

Options

Weighing plate for dosage control
Filter System „Bag filter”
Camera monitoring
Traffic lighting
Additional working lights
Custom color

Show less

Further data on request / All data subject to change / Illustrations may contain optional features

You can find more information regarding the CO2 emissions of all machines here.

Documents

Datasheet Datasheet_BS3_BS 5_PRE91094010_SA

Brochure Brochure_BS3_BS5_PRE107356_2301

Maintenance

Maintenance: Good access: Quickly completed.

All maintenance points can be reached readily. Large service doors with simple locks open the way for good maintenance.

Extended warranties

Play it safe.

Peace of mind is priority number one: This not only applies to our machines. Protect yourself from unexpected costs even after expiry of the legal warranty. With our extended warranties, you receive all-round protection for up to 60 months.

Learn more

Assistance

Quality is the best protection for your investment.

When you see BOMAG on a machine, you can expect real quality. This applies both to our original parts and our service. Opting for a BOMAG means choosing top quality every time. Original parts and service are there to protect your investment. They ensure 100% machine power and availability – and ultimately the productivity and cost-effectiveness of your company. BOMAG offers a range of service products to keep you on the road.

Learn more