Stabilizer and recycler

Tractor-towed stabilizer BOMAG RS 300: Perfect interaction in the tractor class from 300 hp.

Info

Simply mill, mix, stabilize.

Modern tractors have impressive engine power: they can now also be used for heavy earthmoving work. A tractor-towed stabilizer can be driven directly via the rear PTO shaft. The advantages of this combination are plain to see: the investment is low, the system is very light and highly manoeuvrable, and a tractor can also perform other tasks on the construction site, resulting in high annual capacity utilisation.

Stabilization is often the most sensible and sometimes the only option, both economically and ecologically. The German Closed Substance Cycle and Waste Management Act stipulates that no soil that can be re-used on the construction site should be driven away.

Stabilization eliminates the need to replace non-load-bearing soils. This process removes moisture from the material by mixing in binders (mix-in-place method), thus improving the compaction properties and load-bearing capacity. By mixing in cement, even unstable soils can be made load-bearing.

On smaller construction sites, in particular, using a tractor-towed stabilizer makes more and more sense. The milling and stabilizer units are an ideal addition to the fleet for construction and service companies involved in earthmoving or soil replacement operations.

With replaceable wear plates.

The side plates, including skids, are also designed to be particularly thick and durable. In addition, the inside of the mixing chamber is plated with replaceable wear plates. These 18 plates have a Brinell hardness of 540.

Water injection ensures homogeneous distribution.

The RS 300 tractor-towed stabilizer is optionally available with water injection directly into the mixing chamber. This always allows the exact amount of water required for the reaction of the cement to be injected. The system achieves an even distribution of water across the entire milling width (up to 500 l/min.).

The RS 300 tractor-towed stabilizer uses the shovel effect.

Thanks to their special geometry and arrangement, the double cutting tools create a shovel effect: just like a shovel edge, strongly cohesive soils are first “cut up” and then mixed thoroughly.

Get more out of your tractor.

BOMAG's most powerful model is designed for use with tractors from 300 to 450 hp. The RS 300 tractor-towed stabilizer is one of the most powerful in its class and is also suitable for larger stabilization, soil improvement and road construction applications.

For more speed and throughput.

A very large rotor with a diameter of almost 1.5 m ensures a high cutting speed. The belt box is not pulled through the material to be mixed. At the same time, the long tool carriers enable a very high advance rate in cohesive soils or reduced fuel consumption at lower speeds.

2.5 m working width and 50 cm milling depth? No problem!

With its strong power belts, the BOMAG RS 300 can reach milling depths of up to 50 cm. The working width of the tractor-towed stabilizer is 2.5 m.

Full power with 1,000 revolutions.

The drive train is suitable for PTO shafts with the standard dimension (1 3/4 inch). At maximum milling depth, the PTO shaft has to overcome an angle of only 5 degrees. The required input speed is 1,000 rpm.

Extremely durable, thanks to wear-resistant steel.

The mixing chamber is particularly robust. The hood is made entirely of wear-resistant steel with 400 HB (Brinell hardness). The large, hydraulically adjustable tailgate, which is hinged high up, makes it easy to adjust the crushing and mixing quality.

Cutting-edge technology for fast service.

An exchange holder system with extra-large double cutting tools—each with a 25 mm diameter—is used. The base of the holder system is screwed on. Each component can be replaced quickly. The advantage: very short service times.

Almost limitless power.

Coupling to the tractor is simple via the 3-point hitch (category 3 or 4). The camber can always be corrected perfectly via the hydraulic top link. The milling depth can then be adjusted hydraulically simply and variably via the independently adjustable side plates. Power is transmitted to the rotor via the PTO shaft, gearbox and two four-part power belts on both sides.

Cutting tools in carbide quality and for every application.

The BOMAG RS 300 is ideally equipped for a wide range of applications thanks to its large, highly break-resistant and particularly durable cutting tools with a shaft diameter of 25 mm.

Weight 6.710 kg

Working width 2.500 mm

Request an offer Receive a non-binding offer

Documents

Datasheet Datasheet_RS300_PRE91021010_SA

Brochure Brochure_RS300_PRE107355_2110

View all

Find your nearest Dealer

Contact Dealer Change Dealer

Please enter your location

Searching for Spare parts?

Contact your distribution partner

Find your nearest dealer

Spare parts enquiries

parts⁤@⁤bomag.com

Parts Catalogue for Light Equipment

To the catalogue

Directly to the Machines

Product Group

Refuse compactors

Recyclers & stabilizers

Pavers & feeders

Cold planers

Asphalt rollers

Single drum rollers & soil compactors

Light equipment

Fields of application

Stabilizing and recycling reinforces subsoils and allows the replacement of damaged bitumen road surface layers.

Please enable the use of cookies to view this content

Details on the use of cookies can be found in our Privacy Policy

BOMAG tractor-towed stabilizer are particularly suitable for smaller construction projects, pavement and road building as well as for embankments and backfilling. The tractor can be used for a wide range of practical purposes e.g. to pull the binder spreader, the water tank or the tractor-towed stabilizer. A tractor-towed stabilizer can be used to mix in binders or stabilize and improve non-load-bearing soils.

Specifications

Standards

Options

Show less

Further data on request / All data subject to change / Illustrations may contain optional features

You can find more information regarding the CO2 emissions of all machines here.

Documents

Datasheet Datasheet_RS300_PRE91021010_SA

Brochure Brochure_RS300_PRE107355_2110

Maintenance

Maintenance: Good access: Quickly completed.

All maintenance points can be reached easily. Large service doors with simple locks open the way for good maintenance.

Extended warranties

Play it safe.

Peace of mind is priority number one: This not only applies to our machines. Protect yourself from unexpected costs even after expiry of the legal warranty. With our extended warranties, you receive all-round protection for up to 60 months.

Learn more

Assistance

Quality is the best protection for your investment.

When you see BOMAG on a machine, you can expect real quality. This applies both to our original parts and our service. Opting for a BOMAG means choosing top quality every time. Original parts and service are there to protect your investment. They ensure 100% machine power and availability – and ultimately the productivity and cost-effectiveness of your company. BOMAG offers a range of service products to keep you on the road.

Learn more